Wheelmuck 750ml Spray Bottle

 Pickup only from the warehouse in Heidelberg West Vic (No shipping)

Wheels can get dirty relatively fast with a build up of brake dust. Wheelmuck have specifically created a NO EFFORT product that removes brake dust effortlessly called Wheelmuck+. The formula is fast acting and has been specially formulated at a viscosity to allow easy application and to enable it to be very cost effective.
Wheelmuck+ is also PH neutral which makes it safe to use on all wheels and painted surfaces. Wheelmuck+ is a little smelly, but rest assured that component is 100% biodegradable.
When using Wheelmuck+, you’ll see it undergoes a colour change from yellow to red as a reaction occurs to dislodge the brake dust iron contaminants, enabling it to be washed away with water.

Made in New Zealand
Completely different technology to regular wheel cleaners
PH Neutral- Safe on wheels and painted surfaces
Active is 100% Biodegradable
Low Odour
Low Foaming
2-3 x more wheel washes than similar imported products due to WHEELMUCK+ allowing a very thin application and still working extremely well- very cost effective.
Easy application due to viscosity.
Better coverage due to viscosity and anti foaming properties.
Colour coding during stages of reaction with contaminants.
Can be used for decontamination of vehicle body panels.

Note before: It is recommended to only do one or two wheels at a time. For ceramic pad dust, dirt, grease or tyre silicone overspray a slight agitation with a soft brush is necessary.

Application:
Step one:
Adjust nozzle on applicator to a fine spray position.
Spray evenly on cool, dry wheels.
Step two:
Leave on for 2-3 minutes. Wheelmuck+ changes from yellow to red to purple as reaction occurs.
If any areas have dried and turned brown, do a quick recoat to those areas just prior to rinsing off.
Step three:
Rinse off with a jet of water from hose or pressure washer.
Reapply and agitate with soft brush if necessary.

Colour coding:
Sprays on YELLOW, if no change then no brake dust contaminants, or possibly ceramic pad dust.
Turns RED as reaction starts.
Turns PURPLE when reaction well underway.
Turns DARK PURPLE when reaction is almost complete. Rinse off just before next step.
If it turns BROWN, reaction has started reversing. A quick spray on BROWN spots with WHEELMUCK+ before rinsing off will sort this.

Caution:
Tarnishing will occur on older corroded clips and older style wheel balancing weights.
Oxidation can occur on Zinc, Cadmium plated or other specific raw surfaces.
Don’t use on rims that are old, bad condition or damaged.
Oxidation stains can occur on driveways. To clean, simply hose off after application. However stain will disappear in a couple weeks regardless.

Pickup only from the warehouse in Heidelberg West Vic